Clavis Type 5 KgF 10-600 Hz Hand Held Belt Tension Meter w/Sensors 3N and 10

Description

Description:
The Clavis hand held beltmeter can be used for all belt tension gauging applications. It produces readings which accurately reflect the tension in the belt, consistently and without any operator dependence.
This device is in use throughout the world, both as a production tool for accurate belt tension setting, and as a quality control gauge of belt tension. The Clavis belt tension meter is both approved and recommended by all of the major manufacturers of drive belts.
The equipment consists of a small sensor head which is held across the belt to be measured. The belt is then tapped to induce the belt to vibrate at its natural frequency. This vibrations are detected and the frequency of the vibration is then displayed on the measurement unit.
The unit is suitable for measuring tension in all types of power transmission belts,  ranging from toothed timing belts, poly-vee belts, and simple vee belts. A general purpose head is supplied, however a range of sensing heads of differing dimensions are available from the factory.
The TYPE 5 version of the meter, has a frequency range from 10.0 Hz to 600 Hz, which will cover virtually all belt tension measuring applications. In addition there is a facility to display belt tension in kilogram Force units of measurement. This value is calculated from the belt span and belt mass data, which is entered into the meter. Up to 3 sets of data may be stored in the meter for easy recall. The display may be changed from a Hz to a kgF reading by the press of a single key.
Specifications:
Frequency Range:
10.0 - 600 Hz, 1.0 - 999 kgF
Accuracy:
±1 digit (10-100 Hz), ±1% (100-600 Hz)
Span Range:
0.001 - 0.999 meters
Mass Range:
0.001 - 0.999 kg/metre
Tension Range:
1.0 - 999 kgF
Temperature:
-10 ~ 60°C
Battery:
Qty 4. AA Batteries needed.