Huntron ProTrack 1 (I) Model 20 Troubleshooting/Diagnostic Component Test System

Description

Huntron ProTrack 1 Model 20 Troubleshooting System
Comes with what you see in the pictures. If you don't see it, you probably won't get it.
Specifications are from Huntron and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This unit has a new set of standard test leads (1 black, 1 red), a USB Cable (not shown but is included) and power cord. The software is downloadable from Huntron (we can also provide it if needed). The unit ships fully tested and guaranteed to work for 30-days, parts and labor, excluding freight.
The Unit's Serial Number Tag Reads:
Model Number:
ProTrack 1 / Model 20
Serial Number:
KJ4-01115
Power Requirements:
100-240 VAC~, 47-63 Hz, 35 Watts
Description:
The ProTrack 1 is one of the most advanced troubleshooting tools developed to date. It provides maximum test flexibility and control while keeping its operation easy to use. Huntron's unique power-off testing challenges the belieft that functional component testing is the most effective test method for isolating and determining failures. The core technology that's key to this instrument's powerful troubleshooting capabilities is called Analog Signature Analysis (ASA).
With ASA You can:
Troubleshoot circuitry that cannot be powered up due to a shorted condition.
Troubleshoot in a qualitative mode, allowing you to see physical problems with a suspect component.
Compare device characteristics with known types for better matching.
Investigate intermittent problems by seeing marginal indicators, such as small amounts of leakage, noise, etc.
Eliminate risk of accidental shorting across other points during POWER ON testing which could further damage the component or other components on the board.
Minimize the risk of shock hazard since the ASA troubleshooting approach requires no power applied to the circuitry.
Perform preventative maintenance by seeing flaws in components that could possibly lead to untimely failures.
Look at replacement components before they are installed in circuitry to reduce the risk of installing defective ones.
Electrical Specifications:
Test Signal:
Sine Wave
Open Circuit Voltage (V
s
):
24 Selections of Peak Voltage:
200 mV, 400 mV, 600 mV, 800 mV. 1 V to 20 V in 1 V steps including 10 V (Low), 15 V (Med 1), 20 V (Med 2)
Source Resistance (R
s
)
1
:
16 Selections of Resistance:
10 Ω, 20 Ω, 50 Ω, 100 Ω, 200 Ω, 500 Ω, 1 kΩ, 2 kΩ, 5 kΩ, 10 kΩ, 20 kΩ, 50 kΩ, 100 kΩ, 54 Ω (Low), 1.2 kΩ (Med 1), 26.7 kΩ (Med 2)
Maximum Current:
10 V / 50 Ω = 200 mA
PK
Minimum Current:
200 mV / 100 kΩ = 2 µA
PK
Frequency (F
s
):
40 Frequency Selections:
20 Hz to 190 Hz in 10 Hz steps, 200 Hz to 1.9 kHz in 100 Hz steps, 2 kHz to 5 kHz in 1 kHz steps
Channels:
Number:
2
Display Modes:
A, B, Alt, A+B
Overvoltage Protection:
Electronic circuit breaker
Pulse Generator:
Number of Outputs:
2
Level:
0 to ±10 Volts
Width (Pulse Mode):
2% to 50% duty cycle
Source Resistance:
100 Ω
Short Circuit Current:
100 mA max.
Displays:
CRT:
Monochrome, 2.8" (7 cm) diagonal
LCD:
Full graphic, 128 x 64 pixels
Digitizer (Model 20 Only):
Type:
8 bit High Speed
Number of A/Ds:
2
PC Interface (Model 20 Only):
Type:
USB2.0
Power Requirements:
Line Voltage:
90 VAC to 250 VAC
Frequency:
47 to 63 Hz
Power:
35 Watts max.
General Specifications:
Size:
11.6" W x 4.5" H x 15" D (30 cm x 11.5 cm x 38 cm)
Weight:
10.5 lb (4.8 kg) net
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
05/08/20