Kikisui TOS 9000 w/ TOS 9020 Automatic Voltage withstand / dielectric insulation

Description

You are bidding on a Kikisui TOS9000 / TOS9020 Dielectric withstand tester .  Fully working and in great physical condition with recent calibration.  See pics for accessories that come with Units.  Will have to ship in two separate shipments/ boxes.. Calculated ship price is for just the heavier main unit so an additional flat fee handling cost was applied to include the other (can discuss other options if interested)  .  Full Spec sheet and operation manual can be found at link below :
https://manual.kikusui.co.jp/T/TOS9000_E2.pdf
Withstanding Voltage Tester: AC 5 kV/40 mA (transformer capacity: 500 VA) Insulation Resistance Tester: DC 50 to 1000 V, 1M to 9999 MW
Can be combined with peripherals to build the TOS9000 Automatic Testing System
Outline
The Model TOS9000 automatic withstanding voltage and insulation resistance tester is an automatic tester equipped with two functions for withstanding voltage testing and insulation resistance testing. Combining with the Model TOS6200 Earth Continuity Tester through GPIB enables performing of three types of tests in a single step.
The withstanding voltage tester has performance of a maximum output of 5 kV (4 kV when used with the Model TOS9020 High Voltage Scanning Unit) and transformer capacity of 500 VA. The insulation resistance tester is equipped with a test voltage of 50 to 1000 V and measuring range of 1M to 9999 MW. In addition, test parameters and test processes can be programmed and stored in memory using the data entry keys, cursor/scroll keys and fluorescent display on the front panel as a result of being equipped with a CPU. There is no need to reset test parameters each time testing is performed since the desired test parameters can be set with a single remote control operation. Settings can naturally also be recalled by remote control thus significantly promoting greater automation and efficiency in testing. Moreover, since the TOS9000 comes with built-in GPIB interface as standard feature, it enables the construction of fully automated system operated by computer.
Features
■GPIB Control
Setting of test parameters, start/stop control and so on can be controlled with simple GPIB commands from an external computer. In addition, tester status, test results, measured values and other data can be transferred from the TOS9000 to the computer.
■Sequence Control
Each of the withstanding voltage, insulation resistance and low ohm tests can be combined as desired from the panel of the TOS9000 for continuous testing. A maximum of 98 steps of continuous testing can be programmed. During performing the tests, each step memory will proceed in sequentially from [1] to [98] simply by recalling the program and pressing the start button.
■Manual Control
Since each of the settings for withstanding voltage, insulation resistance and AC low ohm testing can be stored in memory for up to 10 sets of test parameters set in independent testing, there is no need to reset test parameters each time testing is performed. The desired tes