Ring Wired 2021 Video Doorbell Vinyl Mount 5° & 15° angle wedges Also available

Description

Fits the NEW 59$ Ring Video Doorbell Wired 2021 release. Released Feb 24th 2021.
This item Does NOT fit ANY other Ring doorbell.  For other Ring doorbells see  different listing. note: RING PRO is narrower and taller and is different from RING Original ,Ring 2, Ring 3....etc
This item Does NOT fit Ring 2, Ring 2nd gen, Ring 2020, Ring 3, Ring 3 plus or Ring ELITE. Those are available in a different listing.
Description of Item:
This is the Cedar siding, cement board siding, Aluminum siding and Vinyl siding version for standard lap siding panels.
Colored shim to fix the angled doorbell problem where your doorbell when screwed to vinyl or slanted siding this will make the doorbell face straight ahead instead of slanted upwards.  Choose a color that’s close to your siding color or choose black to match the back of the Video Doorbell.
If you have a hard siding that has a flat front that is metal or made of wood choose the board/metal mount as it will be flat to match your flat front siding and a larger projection to match wood and metals smaller projection (thickness)..
If you have a flexible standard vinyl siding choose the Vinyl version (if available) it will have a slight curve to match the curve in the vinyl and have a larger projection (thickness) to match vinyl siding. If you have dutchlap vinyl siding you must contact me. Please see pictures and read below.
Comes with longer screws and installation instruction sheet.  No one else does this but the original nearlynewmodels mount.
Made of high quality plastic that is made for heat and cold. Everyone else is using BIODEGRADABLE PLA which is absolutely what you DO NOT want for an item outside.
This item Does NOT need any Adapters to fit the newer doorbells. Holes are made into the mount itself. Nearlynewmodels mount is the only one doing this.
Holes for mounting the angle shims are on the mount. Nearlynewmodels mount is the only one doing this.
Angle Shims 5° and 15° available separately for:
Left or Right
Up or Down
If you need more or less of an angle contact me.
*This item Does NOT fit on Dutchlap Dutch Lap style siding (Dutchlap siding has a flat front that proceeds into an angled top that slants backwards towards the house. ) For Dutchlap Dutch Lap vinyl siding please contact me for custom order as every Dutchlap siding panel is different and these have to be made to fit your siding dimensions. If you are not sure if you have Dutch Lap style siding. send me a picture of your siding. i can tell by looking at a picture. Fits standard siding with common 1/2 projection.
Measuring your Siding:
To measure your siding you measure a single panel from the bottom lip of the top panel to the bottom lip of the next panel. On the panel you want your doorbell. It’s important to not only measure the height of panel but also the projection(how much one panel overlaps the other) when ordering to confirm fitment. For best fitment for standard vinyl
Siding your measurement should be 1/2 inch. For board metal mounts it should be 3/8 projection.
If when you are measuring your siding to choose a size and you notice there is a "hump" in your tape measure and it does not lay flat on the siding. Then you most likely have Dutch Lap and will need to contact me as none of these mounts offered fit dutchlap style siding.
*If you are unsure of the mount you need or the siding you have do not hesitate to contact me. sending a picture always helps and i can assist you with what item to order.
To Install:
See my new installation video on youtube!
https://www.youtube.com/watch?v=wQ1v_k3mTzY
Siding Options Explained:
3" Vinyl Siding
This is a specialty Vinyl siding. Not as common as the 4 inch or 4 1/2 inches siding.
Comes 3 slats per panel. This item is for Panels that measure exactly 3 inches each and have 1/2 projection. if larger than 3" but less than 4" contact me about custom orders.
3" Vinyl Siding
This is a specialty Hardiboard/metal siding. Not as common as the 4 inch or 4 1/2 inches siding.
Comes 1 slat per panel. This item is for Panels that measure exactly 3 inches each and have 3/8 projection. if larger than 3" but less than 4" contact me about custom orders.
4" Vinyl Siding (common)
This is for STANDARD Traditional Vinyl siding.
Usually comes in single 1 slat per board. This item is for Panels and measure exactly 4" and have 1/2 projection.
4" Board/Metal Siding (common)
This is for Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding.
Usually comes in single 1 slat per board. This item is for Panels and measure exactly 4" and have 3/8 projection.
4.5"+ Board/Metal/All Siding Flat WEDGE Option  (Not common)
This is a 8° FLAT wedge for siding measuring 4.5" or more.
This is for Vinyl siding, Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding.
Usually comes in single 1 slat per board. This is the version you want if you want a  vertical shim or vertical wedge like what ring provides with the ring 2 and ring pro to angle your existing camera up or down.
This has no standoff leg and is similar to the wedge that comes with the ring 2 but is angled 8° instead of 5° and is solid so no water or bugs can get behind it and gives you a much stronger mounting surface.
This is the version you want if you have a large siding panel this allows you to mount doorbell anywhere on the panel. Perfect for if you want you doorbell higher, lower or centered on the panel. It still has the Siding angle built in so doorbell faces straight ahead.
This is also the version you want if you have flat siding (brick, stucco, etc) and want to angle your doorbell up or down 8°.
This is also the version you want if you have angled siding such as vinyl siding but your doorbell is too low and you want it angled up more. this will angle the doorbell up addition 7 degrees on angled siding.
(This particular item is not shown)
Contact me about other sizes not listed above.
Angle shims are Flat wedge shims that angle the doorbell in the direction specified.
5° and 15° Angle mounts available. U/D angles the doorbell up and down the degrees you choose and the L/R angles the doorbell left or right that angle specified.
For Dutch Lap vinyl siding contact me. Every Dutchlap siding panel measures slightly different, some have larger flat spot and smaller angle or vice versa.
Printed in a material called PETG. This material resists UV LIGHT and resists all sorts of chemicals. Recyclable. And most importantly resists cold temperatures as well as up to 200 degrees Fahrenheit.
Ships with printed installation instruction sheet.
Comes with two longer screws. All mounting hardware you need is included. Ring Doorbell not included.